Fine grinding of raw meat by using emulsitators with the new cutting mechanism
Abstract
In the article the equations allowing to optimize geometrical parameters of the knife perforated plate by the coefficient of throughput and by the area of the throughput section for the whole model range of emulsitators are offered; the optimal thickness of the knife perforated plate was determined; theoretically, the use of sliding cutting in the rubbing pair of knife - perforated plate is justified, and for the first time the formula for determining the optimal length of the cutting edge of the blade depending on the width of the circular working surface of the perforated plate and its outer diameter is obtained; a new engineering technique for determining the structural, geometric and hydraulic parameters of the entire cutting mechanism is proposed and its experimental confirmation is given.
About the Authors
V. Ya. Grudanov
Educational establishment «Belarusian State Agrarian Technical University»
Belarus
Belarus
Grudanov Vladimir Ya. — Doctor of Engineering Sciences, Professor, Professor of Technologies and Technical Support of Farm Products Processing Department
99, Nezavisimosti, 220123, Minsk, Republic of Belarus
A. A. Brench
Educational establishment «Belarusian State Agrarian Technical University»
Belarus
Belarus
Brench Andrey A. — Candidate of Engineering Sciences, Associate Professor, Dean of Engineering and Technology faculty
99, Nezavisimosti, 220123, Minsk, Republic of Belarus
L. T. Tkacheva
Educational establishment «Belarusian State Agrarian Technical University»
Belarus
Belarus
Tkacheva Lyudmila T. — Candidate of Engineering Sciences, Associate Professor, Associate Professor of Occupational Safety Management Department
99, Nezavisimosti, 220123, Minsk, Republic of Belarus
A. M. Mazur
Educational establishment «Belarusian State Agrarian Technical University»
Belarus
Belarus
Mazur Anatoly M. — Doctor of Engineering Sciences, Professor, Professor of Technologies and Technical Support of Farm Products Processing Department
99, Nezavisimosti, 220123, Minsk, Republic of Belarus
References
1. Kosoy V.D. Sovershenstvovanie protsessa proizvodstva varenykh kolbas [Improving the production process of cooked sausages]. Legkaya i pischevaya promyshlenost [Light and food industry], 2008, 272 p. (in Russian).
2. Kornjushko L.M. Oborudovanie dliya proizvodstva kolbasnykh izdeliy [The equipment for sausage products manufacture]. Spravochnik [Reference book]. M., 1993, 304 p. (in Russian).
3. Daurski A.N. Rezanie pischevykh materialov. Teoriya protsessa, mashiny, intensifikatsiya [Cutting food materials. The theory of process, machines, intensification]. M, Pischevaya promyshlenost [Food industry], 1980, 240 p. (in Russian).
4. Grudanov V.Ya., Brench A.A., Filipovich M.O. Vliyanie geometricheskikh parametrov nozhei na kachestvo kutterovaniya [The effect of the geometrical parameters of the knives on the cuttering quality]. Vestnik Natsionalnoi academii navuk Belarusi [Bulletin of the National Academy of Sciences of Belarus], 2007, no. 1, pp. 36–40 (in Russian).
5. Grudanov V.Ya., Brench A.A., Khodakova S.N., Filipovich M.O. Povyshenie efektivnisti rapoty mashin dlya izmelcheniya myasnogo cyrjya [Improving the efficiency of meat grinding machines]. Agropanorama [Agripanorama], 2007, no. 6, pp. 18–21 (in Russian).
6. Brench A.A., Filipovich M.O., Tkacheva L.T. Povyshenie efektivnisti protsessa tonkogo izmelcheniya myasnogo syrjya v emulsitatorakh [Improving the efficiency of the fine grinding process of raw meat by using emulsitators]. Inzhenerny vestnik [Engineering journal], 2008, no. 1, pp. 79–82 (in Russian).
7. Grudanov V.Ya., Brench A.A., Tkacheva L.T., Filipovich M.O. Tonkoe izmelchenie myasnogo syrjya novym rezhuschim mekhanizmom v emulsitatorakh [Fine grinding of raw meat by using emulsitators with the new cutting mechanism]. Vesti NAN Belarusi. Seriya agrarnykh havuk [Proceedings of NAS of Belarus. Series of Agrarian Sciences], 2010, no. 3, pp. 105–110 (in Russian).
8. Brench A.A., Kasperovich A.A., Filipovich M.O. Issledovanie protsessa tonkogo izmelcheniya myasnogo syrjya v emulsitatorakh [Research of fine grinding process of raw meat by using emulsitators]. Doklady mezhdunarodnoy nauchno-prakticheskoy konferentsii «Energosberegauschie tekhnologii I tekhnicheskie sredstvav selskokhozyaistvennom proizvodstve» [Reports of the International Scientific and Practical Conference “Energy-saving technologies and technical means in agricultural production”]. Minsk, 2008, pp. 249–255 (in Russian).
9. Grudanov V.Ya., Vetrov V.S., Izmer A.N., Markevich Yu.I., Filipovich M.O. Tekhnologicheskie osobennosti polucheniya i ispolzovaniya myasnogo syrjya tonkogo izmelcheniya [Technological features of obtaining and use of raw meat of fine grinding]. Doklady mezhdunarodnoy nauchno-prakticheskoy konferentsii «Energosberegauschie tekhnologii I tekhnicheskie sredstvav selskokhozyaistvennom proizvodstve» [Reports of the International Scientific and Practical Conference “Energy-saving technologies and technical means in agricultural production”]. Minsk, 2008, pp. 134–139 (in Russian).
10. Brench A.A., Tkacheva L.T., Filipovich M.O., Kokhovets D.V. Issledovanie protsessa tonkogo izmelcheniya myasnogo syrjya v emulsitatorakh [Research of fine grinding process of raw meat by using emulsitators]. Doklady VII mezhdunarodnoy nauchno-prakticheskoy konferentsii “Innovatsionnye tekhnologii v pischevoi promyshlenosti” [Reports of the VII International Scientific and Practical Conference “Innovative technology in food industry”]. Minsk, 2008, pp. 180–186 (in Russian).
11. Filipovich M.O., Tkacheva L.T., Belokhvostov G.I. Razrabotka metodiki rascheta osnovnykh parametrov pri izmelchenii myasnogo syrjya na emulsitatorakh [Development of the calculation technique of the main parameters at raw meat grinding on emulsitators]. Sovremennaya selskokhozyaistvennaya tekhnika: issledovaniya, proektirovanie, primenenie: materialy mezhdunarodnoi nauchno-prakticheskoy konferentsii [Modern agricultural machinery: research, design, application: materials of the international scientific-practical conference]. Minsk, 2008, pp. 65–67 (in Russian).
12. Grudanov V.Ya., Brench A.A., Datsuk I.E., Filipovich M.O. Ustroistvo dlya izmelcheniya myasnogo syrjya [The device for grinding of raw meat]. Patent RB, no. 14437, 2010 (in Russian).
Review
For citations:
Grudanov V.Ya., Brench A.A., Tkacheva L.T., Mazur A.M. Fine grinding of raw meat by using emulsitators with the new cutting mechanism. Food Industry: Science and Technology. 2020;13(2):58-68. (In Russ.)
Views: 206
Email this article 